This course trains the member in how to prepare a slab door and install various HAGER commercial exit devices, a closer, and an overhead stop. Members will learn installation skills for the field and prepare themselves for participation in the HAGER Certified Installer program. The course also includes door closer and exit device adjustments, troubleshooting, and other tips.
Tools and/or supplies needed: Clear safety glasses/goggles, hard hat, work boots, smooth face hammer, tape measure, utility knife, 4-in-1 combination screwdriver (#1 and #2 Phillips and straight), 10” long #3 Phillips screwdriver, 6” to 12” combination square, center punch, 6" to 24" level, sharp 3/4" or 1" chisel, and adjustable pliers.
|Course Length:||2 Weeks (28 hours)|
|Designed for Craft:||Carpenters|
|Pre-requisites:||Successful completion of Hardware - Basic Hardware Installation class.|
|Upon Completion:||Your UBC Training Verification wallet card will be updated indicating successful course completion.|
|Certificate Type:||This is a Carpenter Skill Advancement Program issued Certificate of Participation only.|
|Certificate Expires:||No expiration date.|
|Refresher Requirement:||No refresher course required at this time.|
Total Class Hours
|Class Location/||Class Fee||Enrolled
|HARDWARE - HOW TO INSTALL AND TROUBLESHOOT HAGER HARDWARE||MON, TUE, THU, SAT
EVE. 5:00PM-9:00PM & SAT. 7:00AM-3:00PM
Total Class Hours - 28
Prerequisite: Successful completion of Hardware - Basic Hardware Installation class.
|EGV - Elk Grove Village
1256 Estes Avenue
Elk Grove Village, IL 60007