HOME HELP

Class Detail

HARDWARE - HAGER CERTIFIED INSTALLER

Course Description

This is a 24-hour certification course where participants must correctly install and adjust commercial hardware items from the HAGER family of locks, closers, and exit devices. Upon successful completion of the six 4-hour modules, a HAGER Certified Installer certification will be issued.

Special Instructions

Tools and/or supplies needed: Clear safety glasses/goggles, hard hat, work boots, pencils, highlighter, smooth face hammer, tape measure, utility knife, 4-in-1 combination screwdriver (#1 and #2 Phillips and straight), 10” long #3 Phillips screwdriver, 6”-12” combination square, center punch, 6”-24” level, sharp ¾”-1” chisel and adjustable pliers.

Course Length: 2 Weeks (24 hours)
Designed for Craft: Carpenters
Pre-requisites: Successful completion of Hardware - Certified Installer Prep class.
Upon Completion: Your UBC Training Verification wallet card will be updated indicating you are a Hager Certified Installer.
Certificate Type: This is a Hager Hardware Installer Certification issued by the Carpenter Training Center endorsed by Hager.
Certificate Expires: Four (4) years from date of course completion.
Refresher Requirement: Before the certificate expires, a sixteen (16) hour refresher class is required to maintain active status.


Scheduled Classes

Starting/
Ending Dates
Class Title Days/
Times
Total Class Hours
Class Location/ Class Fee Enrolled
Max
10/7/2019
10/16/2019
HARDWARE - HAGER CERTIFIED INSTALLER MON, WED, SAT
EVE. 5:00PM-9:00PM & SAT. 7:00AM-3:00PM
Total Class Hours - 24
Prerequisite: Successful completion of Hardware - Certified Installer Prep class.
EGV - Elk Grove Village
1256 Estes Avenue
Elk Grove Village, IL 60007
$25.00 0
10